1. Determine the Type of Damage

- External screen damage: Touch function is normal, only the outer glass is broken.

- Internal screen damage: Display anomalies, lines, leaks, or touch malfunctions.

- Ribbon cable failure: Display works intermittently, may just need to reinsert the ribbon cable.

2. Preparations

Tools needed:

- Special screwdriver set (including Pentalobe and Phillips).

- Suction cup and pry tool.

- Hairdryer or heat gun.

- Anti-static gloves.

Part selection:

- OEM replacement screen (most expensive but best quality).

- Brand-compatible screen (best value for money).

- Low-quality screen (cheap but prone to issues).

3. Detailed Disassembly and Assembly Steps

- Safety shutdown: Press and hold the power and volume keys to shut down to avoid short-circuit risks.

- Heating to remove the screen: Evenly heat the edges at around 80°C for 2-3 minutes to soften the adhesive.

- Carefully separate: Gently lift the screen with a suction cup, slide a plastic pry tool along the edges, and pay attention to the position of the ribbon cable to avoid damage.

- Install the new screen: Disconnect the battery ribbon cable first, then dismantle the screen ribbon cable bracket, install the new screen, and test all functions.

4. Precautions

- Work in a clean, dust-free environment.

- Organize all screws to avoid confusion.

- Align all clips during installation.

- Test the new screen before applying adhesive.

5. Common Issues and Solutions

- Unresponsive touch screen: Check if the ribbon cable is properly inserted.

- Display anomalies: Try reinstalling the ribbon cable.

- Face ID failure: It may be due to damage to the front camera ribbon cable.

6. Repair Recommendations

For beginners without disassembly experience:

- Watch a complete disassembly video first.

- Have a spare phone ready in case of mishaps.

- Consider purchasing a screen kit with installation tools.

If you find the repair process difficult, seek professional help.

Remember, patience and attention to detail are the keys to successful repair. Don't get discouraged if your first attempt fails – practice makes perfect. Good luck with your iPhone screen repair! And remember, if you ever need professional repair services, don't hesitate to contact HRZ for assistance.

1、 Original screen
Original screen refers to a screen produced by a mobile phone manufacturer that is identical to the original screen of the phone. The advantage of this screen is its superior quality and good compatibility with other parts of the phone, ensuring the best display effect and user experience. However, the price of original screens is usually higher due to their production costs and strict quality control. If your phone is still under warranty or you have high demands for screen quality, choosing an original screen is a good choice.

2、 OEM Screen
OEM (Original Equipment Manufacturer) screens are screens produced by partners of mobile phone manufacturers, with similar quality to original screens but usually at a more affordable price. The production process of OEM screens also follows strict standards, so their display effect and service life can be guaranteed. If your budget is limited but you want to get a user experience close to the original screen, then OEM screens are a cost-effective choice.
3、 Compatible with screens
Compatible screens are screens produced by third-party manufacturers, designed to be compatible with multiple phone models. The price of this type of screen is usually lower, but the quality and display effect may vary depending on the manufacturer. When choosing a compatible screen, it is recommended to carefully compare products from different brands and models to ensure that they meet your usage needs. Although screen compatibility may pose certain risks, it is still a viable option if you do not have high requirements for your phone screen or have a very limited budget.

4、 Press fit screenPress fit screen is a type of screen that combines a display screen and a touch screen. The advantage of this screen is that it is reasonably priced, and the display effect and user experience are relatively good. However, the compatibility and stability of laminated screens may not be as good as original or OEM screens, so careful consideration is needed when choosing. If your phone model is relatively rare, or if you do not have high requirements for the display effect and stability of the screen, then pressing the screen may be a suitable choice.
When choosing a mobile phone screen, in addition to considering the screen type and price, it is also necessary to consider the convenience of installation and maintenance. If you do not have the relevant technical knowledge, it is recommended to seek the help of professionals to ensure a smooth screen replacement process.

Comparison of Three Packaging Technologies


1. COG (Chip On Glass): This is one of the most traditional packaging methods, with low technical barriers and low costs, and is the most commonly used technology for screens. From the English version, it can also be seen that this packaging method involves placing IC chips and FPC cables on the back glass of the screen. However, due to the IC chip being located directly below the LCD, a considerable amount of screen space is squeezed, inevitably resulting in a "chin".




2. COF (Chip On Film): Essentially, it is an upgraded version of COG and a key factor in the current screen transformation. The main principle is to place the display driver IC chip into a flexible FPC cable, and then fold it under the screen using the characteristics of the FPC itself. Specifically, through hot pressing, the Gold Bump of the IC chip and the Inner Lead on the flexible substrate circuit will be bonded together. Due to the release of space occupied by IC chips, the lower frame width can generally be reduced by at least 1.5 millimeters.






3. COP (Chip On Pi): It belongs to the process with the most reduced borders, but it should be emphasized that the premise of this process is the application of flexible OLED screens, which utilize the bending characteristics of flexible OLEDs to bend all cables and ICs below the screen. Of course, OLED is also divided into two types: hard screens and flexible screens. To use this technology, a combination of COP packaging technology and flexible OLED must be used. However, this technology still has the disadvantages of high cost and low yield rate.





After introducing the technical foundations of COG, COF, and COP, let's take a look at the practical application of COP technology on Samsung S8. This phone adopts innovative COP screen packaging technology, which allows the screen edges to bend without physical limitations, achieving a nearly borderless visual effect. This technology not only enhances the aesthetic appearance of mobile phones, but also brings them a wider display space.

The rise of full lamination technology
The structure of a screen can be roughly divided into three parts: protective glass, touch screen, and display screen, which are arranged in sequence. To ensure the perfect presentation of the screen, it is usually necessary to perform two bonding operations: one between the protective glass and the touch screen, and the other between the display screen and the touch screen. And the film we are familiar with in daily life is actually the bonding process between the protective glass and the protective film. Although it may seem simple, it also requires exquisite bonding technology.

Screen bonding technology, according to its bonding method, is mainly divided into two categories: full bonding and frame bonding. Frame adhesive, also known as mouth glue bonding, refers to the simple fixation of the four sides of the touch screen and display screen through double-sided tape. This is the bonding method currently used by many display screens, which has the advantages of simple process and low cost. However, due to the presence of an air layer between the display screen and the touch screen, the refraction of light can affect the display effect, which is the main drawback of frame pasting technology.

Full lamination technology uses water-based adhesive or optical adhesive to completely stick the panel and touch screen together without any gaps. Compared to frame stickers, it provides a better display effect. The common full screen solutions in the market mainly come from OGS solutions from touch screen manufacturers, as well as On Cell and In Cell technology solutions led by panel manufacturers. The advantage of full lamination technology is that it eliminates the air layer between the screens, reduces the reflection between the display panel and glass, makes the screen more transparent, and thus improves the display effect of the screen. IMacs using full lamination technology can reduce reflection issues by up to 75%. In addition, full lamination technology can effectively prevent screen dust from entering and enhance the strength of the touch module. More importantly, it can significantly reduce the interference of display panel noise on touch signals.

Although full lamination technology has many advantages, its yield rate is relatively low, mainly due to the possible surface glass and panel loss during the lamination process. Therefore, controlling the defoaming and bonding yield has become the key to reducing costs.

In terms of full lamination technology, there are three main screen technologies: InCell, On Cell, and OGS. If frame pasting technology is used in the production process of mobile phone screens, it will seriously affect the display effect. And full lamination technology can significantly improve the yield rate, thereby reducing costs.



Different screen bonding technologies
In order to reduce the number of bonding cycles and improve the yield rate, several new development directions have emerged. Touch screen manufacturers mainly promote OGS/TOL solutions, while panel manufacturers are more inclined towards On Cell and In Cell technology solutions. These solutions can reduce the number of bonding times, save costs, and achieve the goal of lightweight.

In Cell technology is an innovative technique that embeds touch panel functionality into liquid crystal pixels. By embedding touch sensor functionality inside the display screen, the original three-layer structure (protective glass touch screen+display screen) has been optimized to two layers (protective glass+display screen with touch function), making the screen thinner and lighter. However, the research and development threshold for this technology is relatively high, mainly led by panel manufacturers.

Screen imaging principle
In the past, mobile phones had complex functions and rich details, but now, smartphones seem to be simplified into a single screen. We rely on this screen to operate and obtain information. The mobile phone screen displays colorful images through a combination of red, green, and blue pixels. With the development of technology, mobile phones are no longer limited to call functions, and the importance of screens has also become prominent. Whether watching videos, browsing pictures, or playing games, the screen carries the core content. Therefore, when choosing a smartphone, the screen often becomes an indispensable consideration for us.

However, are we really deep enough in our understanding of screens? When choosing a phone, we often only focus on screen size and resolution, but can these two really comprehensively measure the quality of the screen? In complex screen technology, which letter combinations truly reveal the material and panel technology of the screen? In fact, our misunderstanding of screens may be deeper than we imagine.

Unveiling the Technology and Principles of Mobile Screen

To present the text and images in our eyes, mobile phone screens rely on the three primary colors of red (R), green (G), and blue (B). Each pixel on the screen contains a complete RGB sub-pixel arrangement, and colors are recorded and expressed through RGB values. The RGB components of each pixel are within the intensity range of 0-255. It is through the different proportions of red, green, and blue that we can see a rich and colorful world.

Pixel, the color wizard of mobile phone screens

The colorful colors in our eyes are the clever combination of the three primary colors of red (R), green (G), and blue (B) on the screen. Each pixel contains a complete RGB sub-pixel arrangement, which creates a myriad of colors through different combinations of RGB values. Within the brightness range of 0-255, the proportional changes of the RGB three colors constitute the rich and colorful world in our eyes.



The comparison between 441ppi and 326ppi shows that the display effect of 441ppi on the left is more delicate and smooth.



After upgrading to 2K resolution, the screen's delicacy has reached a level that is difficult for the naked eye to distinguish. We have witnessed the continuous increase in screen resolution, which signifies that with the continuous advancement of technology, screens of the same size can now accommodate more pixels. By using PPI (pixel density) as an indicator, we can understand the number of pixels contained in each inch of the screen.

In the early days of the 1080p era of smartphones, we compared the screens of HTC Butterfly and iPhone 5, the world's first 1080p models. After capturing and zooming in on the screen with a macro lens, we found that the 441ppi HTC Butterfly surpassed the 326ppi iPhone 5 in terms of delicacy. This means that visually, the graininess on the screen is significantly reduced, and the overall display effect is more delicate and smooth. Nowadays, as mobile phone screens enter the 2K era, this level of delicacy has reached new heights, although it is still uncertain whether the naked eye can detect this change.

However, to comprehensively evaluate the quality of a mobile phone screen, relying solely on screen size and resolution is far from enough. These visible red, green, and blue small bright spots, also known as pixels, are undoubtedly the foundation, but they are only a part of screen display technology. The screen material and display technology also have a profound impact on the final visual effect.

LCD and OLED technology
In the current smartphone market, mainstream screen technologies can be divided into two categories: LCD and OLED.



LCD screens rely on backlighting during display, and light needs to pass through two layers of glass, a substrate, and various optical films, alignment films, color filters, and other components to produce polarization, which inevitably results in a loss of brightness and color. TFT, also known as thin-film transistor technology, is a key technology in LCD screens. It improves image quality by depositing a thin film as a channel area on a glass substrate.

In the TFT-LCD structure, the upper glass substrate is closely adjacent to the color filter, while the lower glass substrate is embedded with transistors. When current passes through a transistor, an electric field change is generated, causing liquid crystal molecules to deflect, thereby changing the polarization of light. Polarizers determine the brightness and darkness of pixels based on this polarity change. At the same time, the color filter attached to the upper layer of glass forms what we call RGB tri color pixels, which together constitute the colors and images displayed on the screen.



Subsequently, we will explore the types or panel technologies of LCD panels. LCD panels can be divided into two categories: simple matrix drive and active matrix drive. Among them, simple matrix driving mainly includes TN and STN technologies, while active matrix driving covers technologies such as TN, IPS, VA, and OCB. In the current smartphone market, TN and IPS technologies are more common, while VA technology is more commonly used in TV products.

TN screen, also known as Twisted Nematic (twisted nematic liquid crystal) screen, has been widely used since the emergence of liquid crystal technology and once dominated the field of electronic devices. However, nowadays many users mistakenly confuse TN screens with TFT screens, which is actually a misunderstanding of the two concepts. However, due to the mature production technology and affordable price of TN screens, they are still favored by some low-cost mobile phone brands. In addition, the high aperture ratio of TN screens makes them more energy-efficient compared to other technologies at the same brightness, and the response speed of 8-15ms is also quite fast. Therefore, although TN screens have shortcomings such as narrow viewing angles and color distortion, these advantages still make them occupy a place in the smartphone market.



IPS screen, also known as In Plane Switching (transverse electric field effect display technology), has significantly improved the color difference and narrow field of view problems of TN screens in poor viewing angles since its introduction in 1996 with its wide viewing angle technology. The electrodes of IPS liquid crystal are located in the same plane as the liquid crystal, thus achieving a wide viewing angle of 178 degrees up, down, left, and right. This breakthrough effectively overcomes the inherent defects of TN screens. However, IPS screens are not flawless. Despite its excellent viewing angle, it consumes relatively high power and has a slightly insufficient response speed, so it is necessary to weigh its pros and cons when using it.

Subsequently, in 1998, Hitachi launched an upgraded version of S-IPS (Super IPS), which not only inherited the original technological advantages of IPS, but also further optimized the response speed. In 1999, LG Philips joined the IPS camp as a joint venture, and after the bankruptcy of the joint venture in 2006, the IPS business was mainly taken over by LG Display and has continued to develop ever since.

Now, let's turn to OLED technology. OLED， The abbreviation for Organic Light Emitting Diode is different from TFT-LCD in that it has self luminescence and does not require backlight support. OLED technology has many advantages such as wide viewing angle, high contrast, low energy consumption, high reaction speed, full-color and simple process.



According to different driving methods, OLEDs can be divided into passive OLEDs (PMOLEDs) and active OLEDs (AMOLEDs). PMOLED and AMOLED are two different types. If OLED is compared to an upgraded version of LCD, then PMOLED is more similar to STN LCD, which has gradually withdrawn from the market. PMOLED performs poorly in displaying dynamic images and has a relatively slow response speed. Despite its power-saving features, it is limited in size. For smartphone users who pursue large screens and high-definition effects, PMOLED's 5-inch low resolution display is clearly not attractive enough to meet their needs. In addition, expanding the size of PMOLED will lead to an increase in pixel brightness and operating current, thereby shortening its lifespan.

Therefore, the vast majority of OLED screens we come into contact with today are AMOLED screens. AMOLED， Active matrix organic light-emitting diode, meaning active matrix organic light-emitting diode or active matrix organic light-emitting diode. The term 'AM' represents the pixel addressing technology behind it. This technology enables AMOLED to achieve low energy consumption and wide viewing angle display while maintaining high resolution and fast response, becoming one of the mainstream display technologies today. Not only smartphones, but also Samsung and LG's TV products use AMOLED screens, further proving their broad application prospects.

The core of AMOLED technology lies in its OLED matrix molecules, which can emit and store or integrate light into TFTs after electrical excitation. By precisely controlling the direction of current flowing to each pixel, AMOLED achieves high resolution and fast response. Each pixel is equipped with at least two TFTs to ensure stable control of continuous current. TFT backplane technology is crucial for AMOLED, and currently this technology has adopted two solutions: polycrystalline silicon and amorphous silicon.

The significant advantages of AMOLED include its self luminescence, wide viewing angle display, high contrast, and fast response time. In addition, compared to PMOLED, AMOLED also has a higher refresh rate, significantly reducing energy consumption. However, under direct sunlight, the reading effect of AMOLED may be affected to some extent. To improve this issue, Samsung has launched Super AMOLED technology, which enhances the display effect under strong light by reducing the screen spacing.

With the advancement of technology, Super AMOLED technology, as an upgraded version of MOLED, has the core improvement of reducing the screen spacing, which significantly improves the display effect in strong light environments. This technological innovation has significantly improved the outdoor reading experience of Super AMOLED, bringing consumers a more comfortable visual enjoyment.

‌I. Our Core Advantages: More Than a Supplier, Your R&D and Production Extension‌

We deeply understand that in a fiercely competitive market, unique advantages and reliable support are the foundation of your success. Horizon offers multi-dimensional collaboration models:


‌OEM/ODM Professional Manufacturing‌: We are not just a supplier but also a factory with ‌ODM mobile phone screen manufacturing‌ and ‌OEM mobile phone parts production capabilities‌. From design to mass production, we provide professional support to ensure products meet your technical specifications and quality standards.
‌Comprehensive Customization Services‌: Whether you need ‌custom mobile phone parts‌ with unique functions or wish to launch ‌white-label phone accessories‌ under your own brand, we can fulfill your requirements. We offer complete ‌private-label phone accessories‌ and ‌white-label phone accessories supplier services‌, helping you effortlessly build brand identity.
‌One-Stop Integrated Supply‌: Beyond core ‌OEM services for phone screens‌, we also produce ‌ODM mobile batteries‌ and provide a wide range of accessories such as phone housings and flex cables. At Horizon, you can complete "screen + battery + peripherals"全套采购 (full-set procurement), significantly simplifying supply chain management and boosting efficiency.


‌II. Quality Foundation: 100% Tested, Display Experience Matching Original Screens‌

For mobile phone screens, quality directly impacts user experience and brand reputation. Horizon uncompromisingly prioritizes excellence:


‌Full-Type Coverage‌: We offer mainstream screen types, including ‌Incell, TFT, Original-equivalent (Ori), OLED‌, with sizes and resolutions matching ‌original screens‌, ensuring perfect compatibility and display performance.
‌Strict Quality Control‌: Every screen undergoes ‌100% rigorous testing‌ before shipment, guaranteeing no dead pixels, flawless touch functionality, and reliable performance. Our products adhere to ‌high-quality and reliability standards‌, with brightness exceeding ‌400cd/m²‌ for clear visibility in any lighting environment.
‌Brand Customization Freedom‌: We support ‌LOGO customization on product packaging‌, allowing your brand to be consistently represented from inside out.


‌III. Wholesale-Exclusive Value: High-Quality at Competitive Prices, Serving Globally‌

We specialize in wholesale, aiming to maximize your commercial value:


‌Price Advantage‌: Leveraging scale production and vertically integrated supply chains, we offer ‌highly competitive prices‌ for bulk orders, ensuring your profit margins.
‌Convenient Logistics‌: We support ‌DDP (Delivered Duty Paid) services‌ in most countries, resolving complex logistics, customs clearance, and tax issues, ensuring your goods arrive safely and hassle-free at their destination.
‌Reliable Commitment‌: A decade of industry experience has honed not only technical expertise but also credibility. We are committed to building long-term, stable partnerships, serving as a reliable backbone for your business growth.



‌Choosing Horizon means selecting a partner that integrates R&D support, flexible manufacturing, quality assurance, and global service.‌

‌Contact us now to discuss your bulk orders and customization needs! Let’s embark on a new chapter of efficient profitability together!‌

‌Core Advantages Recap‌: OEM mobile phone parts | ODM phone screen manufacturer | Custom phone parts manufacturer | Private label phone accessories | Phone screen OEM services | Mobile battery ODM factory | White label phone accessories supplier | One-stop wholesale | Global DDP support